919840086688 919840086688


SS 434 Alloy

Contact Us

Salem Stainless Steel Suppliers Pvt. Ltd.

33 - Lawyer Chenna Thambi Street, Konditope, Kondithope, Chennai, Tamil Nadu - 600079, India

Mobile : +91-9840086688

E-mail : rajesh@ssssgroup.in


Find below the search results for the material you've specified. Please note here this information is NOT to be used for design purposes, and in no event shall MSO be liable for any damages arising from the misuse of this information. What alloys does SSSS Groups supply? Below is a comprehensive list of our alloys arranged by type. More detailed information can be found on each alloys specific page. All of our products are purchased to normal industry standards and come with material test reports (MTR) also known as material certifications. What product forms are available?
    Bar
  • Plate
  • Sheet
  • Pipe
  • Pipe Fittings
  • Flanges
  • Tube
  • Weld Wire
Stainless Steel 434
  • Related Metals : No Related Metal names.
  • Specifications : AISI 434, DIN 1.4113, UNS S43400
Chemistry Data
  • Carbon : 0.05 max
  • Chromium Iron : Balance
  • Manganese : 0.5 max
  • Molybdenum Phosphorus : 0.03 max
  • Silicon : 0.5 max
  • Sulphur : 0.01 max
General Information Principal Design Features Similar in chemistry and performance to 430 stainless steel, 434 has the addition of molybdenum to increase its resistance to corrosion. The alloy combines a ferritic structure with good fabricability and strength characteristics. Applications Primarily used in automotive trim applications and other exterior environments. Machinability Although not commonly available in machinable forms, 434 has been successfully machined using all standard methods. Forming Excellent ductility allows a wide variety of successful forming operations including shearing, blanking and deep drawing. Corrosion Resistance Resistant to mildly corrosive environments and atmospheric conditions. A dense polished finish will make this alloy resistant to all but the most direct salt water exposure. Welding 434 can be successfully welded using most common methods. Standard type 308 filler material may be used, although if the part will undergo thermal cycling, it is recommended to use a filler material of similar composition. Material must be thoroughly clea Forging Begin forging after thorough soaking at 2000-2100 F and finish at 1350 F. Annealing Soak thoroughly at 1450-1600 F, air cool. Hardening This alloy does not respond to hardening by heat treatment. Physical Data
  • Density (lb / cu. in.) : 0.277
  • Specific Gravity : 7.65
  • Specific Heat (Btu/lb/Deg F - [32-212 Deg F]) : 0.11
  • Melting Point (Deg F) : 2750
Mechanical Data
  • Form : Strip
  • Condition : Test Specimen Annealed
  • Temper : 70
  • Tensile Strength : 74
  • Yield Strength : 49
  • Elongation : 26
  • Form : Strip
  • Condition : Test Specimen Annealed
  • Temper : 200
  • Tensile Strength : 70
  • Yield Strength : 47
  • Elongation : 23
  • Form : Strip
  • Condition : Test Specimen Annealed
  • Temper : 400
  • Tensile Strength : 68
  • Yield Strength : 42
  • Elongation : 18
  • Form : Strip
  • Condition : Test Specimen Annealed
  • Temper : 600
  • Tensile Strength : 65
  • Yield Strength : 38
  • Elongation : 18
  • Form : Strip
  • Condition : Test Specimen Annealed
  • Temper : 800
  • Tensile Strength : 62
  • Yield Strength : 34
  • Elongation : 17
  • Form : Strip
  • Condition : Test Specimen Annealed
  • Temper : 1000
  • Tensile Strength : 45
  • Yield Strength : 25
  • Elongation : 26
  • Form : Strip
  • Condition : Test Specimen Annealed
  • Temper : 1200
  • Tensile Strength : 18
  • Yield Strength : 13
  • Elongation : 69
  • Form : Strip
  • Condition : Test Specimen Annealed
  • Temper : 1400
  • Tensile Strength : 6.5
  • Yield Strength : 4.9
  • Elongation : 86
  • Form : Strip
  • Condition : Test Specimen Annealed
  • Temper : 1600
  • Tensile Strength : 4
  • Yield Strength : 2.8
  • Elongation : 79


Enquiry Now