Find below the search results for the material you've specified. Please note here this information is NOT to be used for design purposes, and in no event shall MSO be liable for any damages arising from the misuse of this information.
What alloys does SSSS Groups supply?
Below is a comprehensive list of our alloys arranged by type. More detailed information can be found on each alloys specific page. All of our products are purchased to normal industry standards and come with material test reports (MTR) also known as material certifications.
What product forms are available?
Stainless Steel 430
- Pipe Fittings
- Weld Wire
- Related Metals : No Related Metal names.
- Specifications : AISI 430, AMS 5503, AMS 5627, ASTM A176, ASTM A182, ASTM A240, ASTM A268, ASTM A276, ASTM A314, ASTM A473, ASTM A479, ASTM A493, ASTM A511, ASTM A554, ASTM A580, ASTM A815, DIN 1.4016, QQ S763, QQ S766, UNS S43000
Principal Design Features
- Carbon : 0.12 max
- Chromium : 16 - 18
- Iron : Balance
- Manganese : 1 max
- Phosphorus : 0.04 max
- Silicon : 1 max
- Sulphur : 0.03 max
A basic ferritic non-heat treatable stainless steel. Its strengths are in ductility, formability, good corrosion and oxidation resistance, thermal conductivity and finish quality
Appliance, automotive and architectural trim, vaults, heat exchangers, scientific apparatus and vending machine components.
Rated at 60 % of B1112. Relatively easily machined in all common procedures.
Similar in forming characteristics to 304 stainless steel without the same degree of ductility. It does not, however, work harden greatly.
Resistant to fresh water and mild atmospheric corrodants. Successful in exterior automotive trim applications except in coastal areas where salt water and air will cause corrosion.
All common welding methods used for stainless will be successful with 430. Filler metal should be AWS E/ER308 or 312.
Bring the workpiece to 1500 F (816 C), then on quickly to 1900 F (1038 C). Prolonged exposure at this temperature will cause
grain growth. Do not work this material at less than 1500 F (816 C). Air cool to room temperature and anneal.
Generally the recommended method of hot forming is to work the material at between 1300 and 1500 F. Hot forming is only
required on heavy sections
Soak at 1500 F, furnace cool (50 F/hour) to 1100 F, then air cool.
430 does not respond to hardening by heat treatment.
- Density (lb / cu. in.) : 0.276
- Specific Gravity : 7.75
- Specific Heat (Btu/lb/Deg F - [32-212 Deg F]) : 0.11
- Electrical Resistivity (microhm-cm (at 68 Deg F)) : 360
- Melting Point (Deg F) : 2750
- Modulus of Elasticity Tension : 29
MSO currently has no data available for this grade.