919840086688 919840086688


Hastelloy G-30

Contact Us

Salem Stainless Steel Suppliers Pvt. Ltd.

33 - Lawyer Chenna Thambi Street, Konditope, Kondithope, Chennai, Tamil Nadu - 600079, India

Mobile : +91-9840086688

E-mail : rajesh@ssssgroup.in


Find below the search results for the material you've specified. Please note here this information is NOT to be used for design purposes, and in no event shall MSO be liable for any damages arising from the misuse of this information. What alloys does SSSS Groups supply? Below is a comprehensive list of our alloys arranged by type. More detailed information can be found on each alloys specific page. All of our products are purchased to normal industry standards and come with material test reports (MTR) also known as material certifications. What product forms are available?
    Bar
  • Plate
  • Sheet
  • Pipe
  • Pipe Fittings
  • Flanges
  • Tube
  • Weld Wire
Stainless Steel 2205(tm) Related Metals : HASTELLOY(r) G30(r) alloy Specifications :
  • ASTM B366
  • ASTM B581
  • ASTM B582
  • ASTM B619
  • ASTM B622
  • DIN 2.4603
  • UNS N06030
Chemistry Data :
  • Carbon : 0.03 max
  • Chromium : 28 - 31.5
  • Cobalt : 5 max
  • Copper : 1 - 2.4
  • Iron : 13 - 17
  • Manganese : 1.5 max
  • Molybdenum : 4 - 6
  • Nickel : Balance
  • Niobium : 0.3 - 1.5
  • Phosphorus : 0.04 max
  • Silicon : 0.8 max
  • Sulphur : 0.02 max
  • Tungsten : 1.5 - 4
General Information : Principal Design Features A corrosion resistant alloy of nickel-chromium-molybdenum that is especially good for use in oxidizing acids. Applications Chemical process equipment involving pickling acids, phosphoric acid, nitric acid, and sulfuric acid as well as nitric/hydrofluoric acid. Commonly used in reheater tubes, pump components, agitator blades and reboilers in nuclear waste reprocessing. Also u Machinability Conventional machining techniques used for iron based alloys may be used. Machining characteristics are somewhat similar to those for the austenitic (300 Series) stainless steels. This alloy does work-harden during machining and has higher strength and Forming May be formed by conventional means. Corrosion Resistance This alloy has excellent resistance to corrosion from phosphoric acid as well as resisting attack by oxidizing acids such as nitric/hydrofluoric, sulfuric, and nitric/hydrochloric. It resists pitting in an acidic chloride solution to a much higher temper. Welding The commonly used welding methods work well with this alloy. Matching alloy filler metal should be used. If matching alloy is not available then the nearest alloy richer in the essential chemistry (Ni, Co, Cr, Mo) should be used. All weld beads should. Heat Treatment The alloy may be annealed. Also it is important to solution-anneal after hot forming so as to restore corrosion resistance of the alloy. Forging No data. However the alloy has good ductility and thus is capable of being forged. Cold Working Cold forming may be done using standard tooling although plain carbon tool steels are not recommended for forming as they tend to produce galling. Soft die materials (bronze, zinc alloys, etc.) minimize galling and produce good finishes, but die life is Annealing Anneal at 2150 F followed by water quench or rapid air cooling. Hardening Hardens due to cold working only. Physical Data
  • Density (lb / cu. in.) : 0.297
  • Specific Gravity : 8.22
  • Specific Heat (Btu/lb/Deg F - [32-212 Deg F]) : 0.109
  • Electrical Resistivity (microhm-cm (at 68 Deg F)) : 698
  • Melting Point (Deg F) : 2500
  • Thermal Conductivity : 71
  • Mean Coeff Thermal Expansion : 7.1
  • Modulus of Elasticity Tension : 29.3
Mechanical Data Data 01
  • Form : Plate
  • Condition : Heat treated at 2150 F(1177 C)
  • Temper : 70
  • Tensile Strength : 102
  • Yield Strength : 50
  • Elongation : 53
  • Rockwell : B90
Data 02
  • Form : Plate
  • Condition : Heat treated at 2150 F(1177 C)
  • Temper : 200
  • Tensile Strength : 95
  • Yield Strength : 41
  • Elongation : 53
Data 03
  • Form : Plate
  • Condition : Heat treated at 2150 F(1177 C)
  • Temper : 400
  • Tensile Strength : 89
  • Yield Strength : 36
  • Elongation : 58
Data 04
  • Form : Plate
  • Condition : Heat treated at 2150 F(1177 C)
  • Temper : 600
  • Tensile Strength : 83
  • Yield Strength : 32
  • Elongation : 59
Data 05
  • Form : Plate
  • Condition : Heat treated at 2150 F(1177 C)
  • Temper : 800
  • Tensile Strength : 79
  • Yield Strength : 30
  • Elongation : 60
Data 06
  • Form : Plate
  • Condition : Heat treated at 2150 F(1177 C)
  • Temper : 1000
  • Tensile Strength : 75
  • Yield Strength : 29
  • Elongation : 61